Filter
Top Products
Chapter 6: IP interface configuration
62 Installing and Configuring the Avaya S8500 Media Server February 2007
Verifying that the IPSIs are translated
1. Use SSH to open a SAT session on the media server.
2. Type list ipserver-interface and press Enter.
3. Verify that all ISPI circuit packs are translated.
Upgrading the IPSI firmware version (if necessary)
You might need to upgrade the firmware on some or all the IPSIs. All IPSIs must have the same
firmware load.
1. On the Maintenance Web Interface under IPSI Firmware Upgrades, click IPSI Version.
2. Select Query All and click View.
3. Verify the firmware release for each IPSI.
4. If an upgrade is required, follow the procedures in Firmware Download Procedures at the
Download Center on the Avaya Support web site.
Enabling control of the IPSIs
1. Ensure that the IPSIs have the same, current firmware.
2. On the SAT, type change system-parameters ipserver-interface and press
Enter.
3. Ensure the IPSI Control of Port Networks: field is set to enabled.
4. Submit the screen to save the changes.
Verifying the license status
On the Maintenance Web Interface, under Security, click License File and verify that the
license mode is now normal.