Filter
Top Products
IPSI address configuration
Installing and Configuring the Avaya S8500 Media Server February 2007
55
You administer the static IP address for the circuit pack directly through the Ethernet port
connection on the faceplate (top port). See Figure 11
.
Figure 11: Connecting the laptop directly to the IPSI
Note:
Note: Ensure that you have the password before proceeding.
Depending on the operating system on the Services laptop computer, you might need to clear
the Address Resolution Protocol (ARP) cache before entering a new IP address. If you enter an
IP address and your computer cannot connect, try clearing the cache.
1. On your laptop computer, click Start > Run to open the Run dialog box.
2. Type command and click OK to open a MS-DOS Command Line window.
3. Clear the Address Resolution Protocol (ARP) cache in the laptop.
Figure notes:
1. Services laptop computer
2. PCMCIA Network Interface Card (NIC)
3. NIC adapter cable (if necessary)
4. CAT5 crossover cable to IPSI
cadlipsi KLC 031502
1
2
CLK
S
E
R
V
I
C
E
N
E
T
W
O
R
K
3
4