Filter
Top Products
Pre-installation requirements
Installing and Configuring the Avaya S8500 Media Server February 2007
9
-
Installation and Upgrades for the Avaya G700 Media Gateway and Avaya S8300
Media Server (555-234-100)
-
Avaya IA 770 INTUITY AUDIX Messaging Application Administering the S8300 and
S8400 Media Servers to work with IA 770
● Return to this document and see:
!
Important:
Important: If the S8500 Media Server is configured as an LSP, skip the following section.
-
IP interface configuration on page 53 to program the IP interface.
-
Install an S8500 Media Server as an LSP on page 63 if the S8500 Media Server is
configured as an LSP.
-
Postinstallation administration on page 69
-
Installation verification on page 77
-
Media server access on page 87
-
Installation troubleshooting on page 97 if problems occur during the installation.
Pre-installation requirements
This section describes the tasks that you must complete before you start the installation. You
complete certain tasks before you go on site and other tasks at the site.
Preinstallation tasks to complete at the customer site
Before you start the installation, you must:
● Verify that all the required equipment is on site
● Ensure that the preinstallation team completed the preinstallation tasks
Verifying that all the required equipment is on site
Compare the list of items that were ordered to the contents of the boxes to verify that you have
all the equipment. Your project manager can give you an inventory list. Do not rely on the
packing slips inside the boxes for the correct information.