Filter
Top Products
S8500 LSP license file
Installing and Configuring the Avaya S8500 Media Server February 2007
25
The PE interface on an S8500 LSP supports three adjuncts:
● Call Management System (CMS)
● Application Enablement Services (AESVCS)
● Call Detail Recording (CDR)
The S8500 as a primary controller can connect to gateways and endpoints that use both
C-LANs and the PE interface. The traffic over these interfaces can be load balanced.
S8500 LSP license file
The license file for an LSP must have the following attributes:
● The Local Survivable Processor (FEAT_LSP) field is set to y.
● A Module ID (MID) that is greater than 1. This value is set by the license file and cannot be
administered in Communication Manager.
● A System ID (SID). The SID is unique to the system configuration. The primary controller
and all LSPs have the same SID.
● The serial number of an H.248 media gateway to serve as the license serial number host.
During initial installation, when the LSP server is reset, the LSP sends this serial number to
the primary controller. The primary controller then matches the serial number to the serial
number of an existing media gateway. The primary controller sends the IP address of the
media gateway back to the LSP. To verify the license, the LSP can then contact that media
gateway and request the serial number. The LSP compares the serial number from the
media gateway with the serial number from the license of the LSP.
About SSH
Secure Shell (SSH) is both a computer program and an associated network protocol that you
use to log in to and run commands on a networked computer. SSH provides secure encrypted
communications between two untrusted hosts over an insecure network. Avaya strongly
recommends that you use SSH instead of Telnet for most interactive connections to the Avaya
media servers and other devices on a customer network.
To use SSH, a third-party SSH client must be installed on your computer. PuTTY is one such
client. You can download PuTTY from http://www.putty.nl/download.html
.