Filter
Top Products
Chapter 6: IP interface configuration
58 Installing and Configuring the Avaya S8500 Media Server February 2007
8. Check the LED on the IPSIfaceplate. Verify that the display shows the letters I and P and a
filled-in V at the bottom. (See Figure 12
).
Figure 12: IPSI LED display for static address
Note:
Note: Clear the ARP cache on the laptop before connecting to another IPSI. If you do
not clear the cache, the laptop appears to stop and does not connect to the next
IPSI.
9. Repeat this procedure for each IPSI circuit pack.
Figure notes:
1. IPSI has a static IP address 2. IPSI has connectivity and an IP address
ledlip1 KLC 030502
1
2
CLK
S
E
R
V
I
C
E
N
E
T
W
O
R
K