Filter
Top Products
Installing and Configuring the Avaya S8500 Media Server February 2007 69
Chapter 8: Postinstallation administration
This section covers the following tasks:
● Verifying translations on page 69
● Setting rules for daylight savings time on page 70
● Setting locations (if necessary) on page 71
● Verifying the date and the time on page 72
● Clearing and resolving alarms on page 72
● Backing up files to the compact flash media on page 75
● Enabling alarms to INADS by way of a modem on page 75
● Enabling alarms to INADS by way of the SNMP module on page 76
● Before leaving the site on page 76
Verifying translations
1. Open a SAT session on the media server.
2. To view all the administered circuit packs in the system, type list configuration all
and press Enter.
3. To verify the location of the IPSI circuit packs,type list ipserver-interface and
press Enter.
For more information, see your planning documents and check the administration status on the
following items:
● list station
● list trunk-group
● list hunt-group