Filter
Top Products
Chapter 1: Introduction
20 Installing and Configuring the Avaya S8500 Media Server February 2007
Figure 8: S8500C Media Server connectivity guide
Note:
Note: If the S8500C is configured as an ESS, the port assignments are different:
● Eth0: Control Network A
● Eth3: Control Network B
● Eth4: LAN, if two dedicated control networks are used
In either case, ETH2 is an internal port dedicated to the SAMP.
Figure notes:
1. Eth0—To the customer network if the
control network is nondedicated. Or, to
the control-network Ethernet switch if the
control network is dedicated
(straight-through CAT5 cable)
2. Eth1—To the Services laptop computer
(cross-over CAT5 cable)
3. Eth3—to the customer network if the
control network is dedicated
(straight-through CAT5 cable)
4. Eth4—Not used
h
2msb8cp LAO 052506
2
1
Slot 1
Slot 2
2
1
1
4
2
3