Filter
Top Products
Administering the primary controller
Installing and Configuring the Avaya S8500 Media Server February 2007
65
Administering the primary controller
You must administer the primary controller so that the controller can identify and communicate
with the S8500 LSP.
1. At the SAT command line, type change node-names ip name and press Enter,
where name is the name of the LSP.
2. In the Name column, type the name of the LSP.
3. In the IP Address column, type the IP address of the LSP.
4. At the SAT command line, type add survivable-processor name and press Enter,
where name is the LSP name from the Node Names screen.
The system displays the Survivable Processor screen.
5. The Type field is automatically populated with LSP. LSP appears in the field if the node
name is not associated with ESS.
6. Enter a network region for the LSP. The default is 1. However, a different network region
might be better suited for the LSP to provide media gateway and IP telephone support.
7. On pages 2 and 3 of the screen, add any adjuncts that the LSP can support if a failover
from the primary controller occurs.
For how to administer the Survivable Processor form, see Administrator Guide for Avaya
Communication Manager (03-300509).
Enabling license server capability on a media gateway
If a G250 or G350 Media Gateway provides the serial number, access the administration level
command line of the media gateway and run the command ip license-server. If a G700 Media
Gateway provides the serial number for the S8500 LSP license, skip this step and continue with
Installing and verifying the license on the new LSP
on page 66.
add survivable-processor sv-mg2-lsp Page 1 of xx
SURVIVABLE PROCESSOR - PROCESSOR ETHERNET
Node Name: sv-mg2-lsp
IP Address: 128.256.173.101
Type: LSP
Network Region: 1