Filter
Top Products
4. Components of an OLite rental tile
4.1 OLite rental frame
Introduction OLite rental frame
The OLite rental frame is made out of aluminium profiles and stainless steel to reduce weight without losing strength. This strong
frame allows you to build OLite LED-walls up to 12 frames high stacked or 15 tiles high trussed. The front of the OLite rental frame
has a grid where OLite modules fit in forming 4 chains.
The top of the OLite rental frame is equipped with two big cones for easy and fast positioning of the upper rental frame. The bottom
corners of the OLite rental frame contain a solid locking mechanism operated with a fixed rugged handle, no tools required. These
locking mechanisms and the big cones ensure a fast and secure attachment between the upper and lower tile. The rear right
side
of the OLite rental frame is equipped with a smaller rugged handle which operates the side locking mechanism to secure the rental
tiles sideways with the neighboring tile.
All sides of the OLite rental frame are provided with small positioning cones and planes to ensure a precise positioning between the
tiles. It’s important to keep those cones and planes clean, otherwise seams will be visible after installation of the rental frame into
the LED-wall.
The left and right rear sides of the OLite rental frame contain two holes which are used to install the stacker system in case of a
base stand OLite display configuration. A mounting plate for the OLite control box is attac
hed inside the OLite rental frame. This
mounting plate with control box can easily be removed without tools to allow fast servicing of the rental tile. Furthermore the left and
right side of the frame are equipped with a fold out carrying handle.
PartslocationoftheOLiterentalframe
BA
C
D
E
F
C
C
G
H
G
I
J
A
BC
Image 4-3
OLite rental frame (OLite 510: R9853010 ; OLite 612: R9853418).
A Small positioning cone.
B Big positioning cone.
C Positioning plane.
D Receiver for small positioning cone.
E Carrying handle.
F Receiver for side locking mechanism.
G Rugged handle for operating top-bottom locking mechanism.
H Removable mounting plate for OLite control box.
I Grid to snap in the OLite modules.
J Small handle for operating side locking mechanism.
16
R5976832 OLITE RENTAL DISPLAY 29/05/2007