Filter
Top Products
11. OLite options
11.1.2 Back cover installation procedure
What has to be done ?
Two support brackets and two lock brackets have to be attached to the rear of the OLite rental tile. Then the plastic cover can be
latched onto the tile without tools.
Image 11-2
Location of the support and lock brackets for the back cover.
Necessary tools
10 mm nut driver.
Necessary parts
• 2 support brackets.
• 2 lock brackets.
• 12 nuts M6.
• 12 hammer bolts M6
• Plastic cover plate.
How to install the back cover of an OLite rental tile ?
1. Fasten the two support brackets (A) to the bottom rear of the ti
le as illustrated. Use four M6 nuts (B) and four M6 hammer bolts
(C) per bracket. Ensure that the support bracket (A) is mounted against the corner brackets (D) as illustrated.
AB
C
D
Image 11-3
2. Fasten the two lock brackets (A) to the inner vertical profiles at the rear of the tile as illustrated. Use two M6 nuts (B) and two M6
hammer bolts (C) per bracket. Ensure that the lock bracket (A) is mounted against the corner brackets (D) as illustrated.
82
R5976832 OLITE RENTAL DISPLAY 29/05/2007