Filter
Top Products
7. Basic set up procedures
7.2 Place OLite rental tiles into the flight case
Necessary tools
• OLite single truss beam.
• Hoisting equipment.
How to place OLite rental tiles into the flight case ?
1. Place an empty open flight case trolley on a level surface to ensure the load will be evenly spread out among the wheels.
2. Turn the handles of the locking mechanism of the OLite rental tile, you want to place upon the trolley, in the unlocked position.
3. Grasp the OLite rental tile by the carrying handles and place it upon the flight case trolley with the LED’s facing the centre of the
flight case. Start with one of the middle positions on the flight case trolley.
Warnin g: At least 2 persons are required to lift up an OLite rental tile.
Image 7-3
Place first tile on flight case trolley.
Tip: You can use a hoisting crane to lift up the OLite rental tile. First attach an OLite truss beam upon the OLite rental tile and
then lift up the truss beam.
4. Secure the OLite rental tile with the flight case trolley by turning the handles of the locking mechanism in the locked position.
Image 7-4
Secure the OLite rental tile with the flight case trolley.
5. Place a partition plate at the front and at the back of the secured OLite rental tile. This is necessary to protect the OLite rental
tile while placing other tiles on the flight
case trolley.
Image 7-5
Place a partition plate at the
front and at the back of the tile before placing an other tile.
6. Repeat from step 2 until the flight case is filled with four secured and protected OLite rental tiles.
R5976832 OLITE RENTAL DISPLAY 29/05/2007
39