Filter
Top Products
7. Basic set up procedures
7. BASIC SET UP PROCEDURES
About this chapter
This chapter contains all installation procedures necessary to set up an OLite rental display. These procedures describe, with de-
tailed step by step actions and illustrations, how to install an OLite rental display in a floor mount or hanging configuration. Some
of the procedures are redundant either for a floor mount or a hanging configuration. See chapter "Set up process of an OLite rental
display", page 33, to follow the correct order of procedures required to set up your OLite rental display in the configuration of your
choice.
Overview
• Remove OLite rental tiles out of the flight case
• Place OLite rental tiles into the flight case
• Install the OLite rental feet
• Install an adjustable foot
• Attach an OLite truss beam upon an OLite rental tile
• Attach an OLite rental tile upon an OLite rental foot
• Attach OLite rental tiles on top of each other
• Attach OLite rental tiles next to each other
• Install an OLite stacker system
• Build up a floor mounted OLite rental display
• Build up a hanging OLite rental display with truss beams
• Secure a hanging OLite rental display
R5976832 OLITE RENTAL DISPLAY 29/05/2007
37