Filter
Top Products
7. Basic set up procedures
7.1 Remove OLite rental tiles out of the flight case
Necessary tools
• OLite single truss beam.
• Hoisting equipment.
How to remove the OLite rental tiles out of the flight case ?
1. Open the four lock handles of the flight case.
2. Remove the flight case cover by lifting it up vertically.
Warnin g: At least 2 persons are required to lift up the co ver of the flight case.
Image 7-1
Remove flight case cover.
3. Unlock one of the outer OLite rental tiles by turning the handles of the tile locking mechanisms upwards.
4. Grasp the unlocked OLite rental tile by the carrying handles and lift it vertically out of the flight case.
Warnin g: At least 2 persons are required to lift up an OLite rental tile.
Image 7-2
Unlock outer tile in flight case and lift the tile up.
Tip: You can use a hoisting crane to lift up the OLite rental tile. First attach an OLite truss beam upon the OLite rental tile and
then lift up the truss beam.
5. Repeat from step 3 until all OLite rental tiles are removed.
Caution: The partitions can be re moved for easy access to the OLite rental tiles, bu t ensure there is always a partition present
between the outgoing tile and the remaini
ng tiles in the flight case. Those partitions protect the shaders and LED’s
while m oving the OLite r ental tiles in or out the flight case.
38
R5976832 OLITE RENTAL DISPLAY 29/05/2007