Filter
Top Products
9. OLite creativity pack
9. OLITE CREATIVITY PACK
Introduction
The OLite modules, used in the OLite rental tile, can be used in a different arrangement than the standard set up of 64 OLite 510
or 48 OLite 612 modules per tile. You can place the OLite modules in a creative way to integrate the modules in the set design for
concert touring, television shows, spectaculars, etc. Or you can use the OLite modules as architectural elements, both indoor and
outdoor. To facilitate the creative set up of the OLite modules, Barco offers a set of additional hardware and software to expand the
usage of OLite modules beyond normal screen applications.
The same control box of the OLite rental tile is used but differently configured. Via the Director toolset (control software), the control
box is set in “Customized mode” instead of “Tile mode”. This mode activates all output ports of the control box and allows you
to configure the OLite display in a creative way. See user guide of the Director toolset for more information a
bout the software
configuration of the OLite modules in a customized set up.
Due to power limitations of the cables, used between the OLite modules, the number of modules and the length of the total cable
string is bound to some set up rules described in the following chapters. Despite those rules, the possibilities of the system reach
very far.
To enlarge the creative possibilities of the system, boosting of the OLite 510 modules is disabled in case the
configuration of the control box is set to “Customized mode”. Note that only the OLite 510 modules have
boost mode.
Overview
• Available packages
• OLite support grid
• Possibilities
• OLite creativity example
R5976832 OLITE RENTAL DISPLAY 29/05/2007
67