Filter
Top Products
6. Set up process of an OLite rental display
6. SET UP PROCESS OF AN OLITE RENTAL DISPLAY
About this chapter
This chapter describes roughly the installation process of the OLite rental display for a base stand (floor mount) or truss (hanging)
configuration. Several process stages refer to one or more of the detailed "Basic set up procedures", page 37.
Floor mount or hanging OLite rental display
The OLite rental tiles can be used in a floor mount or in a hanging rental configuration. These configurations are limited in height,
maximum 12 tiles high for a floor mount and maximum 15 tiles high for a hanging configuration. Furthermore, a floor mount (base
stand) configuration requires a stacker system to ensure the stability of the display.
Overview
• Set up of a floor mount OLite rental display
• Set up of a hanging OLite rental display
WARNING: Safety first. Fence off the installation area before starting to install your OLite rental display.
Ensure you read, understand and follow all safety instructions mentioned in the chapter "Safety", page 3, of
this installation manual. Furthermore, make sure thatall installationrequirements for your OLite rental display
are fulfilled, see "Installation requirements", page 9.
R5976832 OLITE RENTAL DISPLAY 29/05/2007 33