Filter
Top Products
9. OLite creativity pack
9.2 OLite support grid
Design guidelines
It’s obvious that the design of the support grid for the OLite modules must comply with several requirements regarding dimensions,
strength, accessibility, etc. The housing of the OLite modules is provided with snap-fits for fast and easy attachment to a support grid
(frame). It’s important to use the correct cutting dimensions in the design of the support grid for optimal attachment of the modules
with the support grid. For more information or help about OLite support grids, contact Barco NV.
• Respect the cutting dimensions used for the snap fit feature of the OLite module.
• It’s recommended that the grid spacing is a multiple of the OLite pixel pitch. This is important to get a good impression o
fthe
video content displayed.
• The plate thickness of the frame must be 3 mm.
• Provide the support grid with the necessary attachment points.
• It’s recommended to brush thesupport grid with grain 120 to smooth away all burrs. This will facilitate the snap in of the module.
OLite 510 cutting dimensions
112 ±0,1
84 ±0,1
82,4
92
100
100 ±0,05
4
±
0
,05
20
70
72
4 ±0,05
1,5 x 45°
5
Image 9-6
Dimensions given in millimeters.
OLite 612 cutting dimensions
112 ±0,1
112 ±0,1
82,4
93
100
100
4
±
0
,05
20
4 ±0,05
1,5 x 45°
5
Image 9-7
Dimensions given in millimeters.
R5976832 OLITE RENTAL DISPLAY 29/05/2007 69