Filter
Top Products
7. Basic set up procedures
Image 7-30
Install truss beams upon the outer row of tiles.
Image 7-31
Unlock the tiles from the flight case.
6. Lift up the complete OLite row out of the flight cases.
Image 7-32
Lift up the complete OLite row out of the flight cases.
7. Place the next unlocked row of OLite tiles just underneath the previously lifted row.
Warnin g: Hoist must take the complete load. Never put extra load on a flight case trolley. Keep approximately 2 mm between
the undermost OLite tiles han ging on the hoist and the next row of OLite tiles standing in the flight cases underneath.
Image 7-33
Place the next unlocked row of OLite tiles just underneath.
8. Attach the next row of OLite tiles standing in the flight cases with the undermost OLite tiles hanging on the hoist. Do this by
pushing the big handles inside the tile and then turning the handles in their horizontal position.
9. Lift up all OLite rows attached to the hoist.
54
R5976832 OLITE RENTAL DISPLAY 29/05/2007