Filter
Top Products
8. Cabling of an OLite rental display
8. CABLING OF AN OLITE RENTAL DISPLAY
Outdoor plugs and sockets for OLite rental tiles
Barco uses custom designed outdoor sockets for power and data connections from tile to tile and to other peripherals. These rugged
sockets are watertight (IP65) when used with the appropriate plugs and sealing rings. Each socket is equipped with a plug holder
clamp which, when locked, ensures the plug is completely pressed into the socket.
E
A
B
C
D
Image 8-1
A Power output port.
B Power input port.
C Data output port.
D Data input port.
E Plug holder clamp.
WARNING: The outdoor input and output sockets for OLite tiles can only be used in conjunction with Barco’s
outdoor cables for LED-walls. Do not use any other cables than those specified.
WARNING: Dummy plugs must be placed on unused outdoor input and output sockets of OLite tiles and all
plug holder clamps must be locked firmly.
WARNING: Make sure that theconnector sockets areprovidedwith sealing rings before plugging in thepower
and data cables. Use the correct sealing ring for the corresponding socket. Black colored ring (B361243, left
image) for power, red (B361595, right image) for data. Replace damaged sealing rings immediately.
Overview
• Power cabling of an OLite rental display
• Data cabling of an OLite rental display
• Module interconnection of a
nOLite510rentalframe
• Module interconnection of an OLite 612 rental frame
• Realize the cabling between OLite module and OLite controller box
R5976832 OLITE RENTAL DISPLAY 29/05/2007
59