Filter
Top Products
12. Servicing
8. Attach a module safety cable with a new OLite module as illustrated in image 12-6 and attach the other end of the module safety
cable to the frame of the OLite display.
9. Guide the new OLite module (with safety cable) through the grid opening, rotate it and snap the module into the grid.
Caution: Ensure to orient the OLite module correctly while snapping in. The connector socket must be at the right seen from
the rear of the display.
10.Reconnect the new OLite module with the cable string doing the following:
a) approach the socket of the module with the cable plug at right angles and with the cable entrance and exit of the plug vertically
oriented.
b) push the plug completely into the socket.
c) fasten the captive lock of the plug.
Caution: Be careful while connecting the cable string to the OLite module to prevent damage of the socket pins.
ABC
90°
Image 12-9
11.Reconnect the power cord of the OLite control box.
When replacing an OLite module, re-calibration is required to adapt the color uniformity and brightness of the
new module with the other modules.
92 R5976832 OLITE RENTAL DISPLAY 29/05/2007