Filter
Top Products
C H A P T E R 6 CLI Command Summary
95
log
NOTE: Enabling logging
may reduce the speed of
DNS resolutions.
Enables or disables logging. When logging is enabled, the DNS
server logs details of the incoming queries, the balancing process
for VIP selection, and the query response to the log file. Default:
disabled.
Syntax:
config dns log [enable|disable]
status
If the 7190 is a primary, Displays the secondary 7190(s) to which
it is currently connected.
If the 7190 is a secondary, Displays the connection status to its
primary.
primary
NOTE: Each primary can
have simultaneous
connections to as many as
four secondary 7190s.
Designate the device as the primary 7190. Connection to any unit
previously designated as primary is lost when this command is
executed. Default: enabled.
Syntax:
config dns primary [enable|disable]
where:
enable designates the 7190 as the primary.
config dns
secondary
NOTE: Upon successful
connection to the primary,
all commands under config
dns zones become
unavailable to the
secondary. Primary and
secondary configurations
are the same and are
transferred to the
secondary after every
“commit” within the
primary.
Designates this unit as a secondary 7190.
Syntax:
config dns secondary <primary ip address>
where:
primary ip address is the address of the primary 7190 to
which the current unit is subordinated as a secondary.
Command Description
Config DNS Commands