Filter
Top Products
C H A P T E R 5 Boot Monitor Command Reference
49
Command Description
autoboot
Use this command to enable or disable the Autoboot function. When
Autoboot is enabled, during startup the 7190 prompts you to press a key
to enter the Boot Monitor command line interface. If you ignore the
prompt, startup concludes with the 7190 in normal operating mode
(displaying the Intel 7190# prompt). When Autoboot is disabled,
the startup sequence is interrupted and displays the Boot Monitor
interface (displaying the monitor> prompt). Autoboot is enabled by
default.
To enable Autoboot, press Enter to accept the default “enable.” To
disable, enter disable, then press Enter.
Example:
monitor>autoboot
Autoboot? [enable]--->
Boot Monitor Command Reference