Filter
Top Products
C H A P T E R 6 CLI Command Summary
87
config sys
software info
Displays all images that have been installed in the 7190. This
includes the index number, the product name, the version number,
the patch number, the build number and the word “Running” next
to the image that is currently active on the 7190.
For example:
Index Product Version Patch Build
----- ------- ------- ----- -----
1 Intel_7190 3.1 0.0 D3 Running
2 Intel_7190 3.0 0.1 D6
software install
NOTE: Save your
configurations before
installing or booting a new
image. Up to five (5)
images can be installed on
a 7190.
Download and install 7190 software through the FTP protocol.
Once installed, images are selected for execution by using the
command, config sys software boot.
Syntax (ftp):
config sys software install <ftp url> {user <user
name>} {password <password>}
where:
url is a valid URL identifying the software image to download.
It must be of the form ftp://<host>/<path_name>.
user name is the user name to use for logging in during file
transfer (ftp only).
password is the password to use for logging in during file
transfer (ftp only).
software boot
NOTE: Save your
configurations before
installing or booting a new
image.
Select a software image and reboot the system under that image.
Syntax:
config sys software boot <index>
where:
index is a valid index number of an installed software image,
as displayed using the command, show sys software
info.
Command Description
Config Sys Commands