Filter
Top Products
C H A P T E R 6Intel® NetStructure™ 7190 Multi-Site Traffic Director User Guide
90
Config Sys SNMP Commands
Command Description
config sys snmp
Changes the prompt level to config sys snmp.
info
Displays information about SNMP agent port, sysContact,
sysName, sysLocation and auto-topology
port
Allows you to specify the port on which the 7190 receives SNMP
requests.
Syntax:
config sys snmp port <agentport>
where agentport is a number between 5020 and 65535 (the
default is 161)
auto-topology
Enables or disables operation of the auto-topology protocol. The
default is
disable.
Syntax:
config sys snmp auto-topology [enable|disable]
sysContact
Allows you to specify a value for the MIB-II variable sysContact.
The default is null.
Syntax:
config sys snmp sysContact <string>
where string is a string of displayable characters.
sysLocation
Allows you to specify a value for the MIB-II variable
sysLocation. The default is null.
Syntax:
config sys snmp sysLocation <system location>
where system location is a string of displayable characters.
sysName
Allows you to specify a value for the MIB-II variable sysName.
The default is the hostname of the 7190.
Syntax:
config sys snmp sysName <system name>
where system location is a string of displayable characters.
config sys snmp
community info
Displays the community strings the 7190 is configured to accept,
such as Community (name), IP address, and Rights. Rights are ro
(read-only) and rw (read-write).
Config Sys SNMP Commands