Filter
Top Products
C H A P T E R 6 CLI Command Summary
105
flash-backup-port
<port#>
Configures the port number with which the backup flash source
communicates with its known peers. The default port number is
2000.
config dns isvgroups
<isvname> services
Moves to the ISV services command level.
info
Displays configured information of all services for the specified
ISV group.
For example, with one service:
Service: 10.10.9.8:80
Service IP: 10.10.9.8 Service Port: 80
Probe Method: none
stats
Displays statistical information for the specified service.
enable
Enables all services that are configured for this ISV group to all
hosts that map to them. Default is enabled.
disable
Disables all services that are configured in this specified ISV
group.
standby
Places all services in standby mode for the specified ISV group.
Standby services are enabled when enabled services are
unavailable.
create
<servicename>
Creates a service where <servicename> is a VIP:port
combination.
config dns isvgroups
<isvname> services
delete
<servicename>
Deletes a service where servicename is a VIP:port combination.
rename
<servicename> new
<servicename>
Changes the servicename of an existing service to the newly
specified.
config dns isvgroups
<isvname> services
<servicename>
Moves to a specific service command level.
Command Description
Config DNS ISV-Groups Commands