Filter
Top Products
Cleaning the Dust
Filter
The Intel
®
NetStructure™ 7195 Multi-Site Traffic Director has a dust
filter element mounted behind the front grille and in front of the dual
intake fans. This filter is washable and should be cleaned every six
months at a minimum. If you use your 7190 in an abnormally dusty
environment, clean the filter more often. You need not interrupt 7190
operation to perform the following cleaning procedure.
To clean the filter:
• Remove the two Phillips screws that secure the metal grille on
the left side of the 7190’s front panel. Remove the grille to
expose the foam filter element.
• Remove the filter element from its recess. It is recommended that
you replace the grille and its screws while the filter element is
being cleaned.
• Wash the filter in warm water and set aside to dry.
Allow the filter to dry thoroughly before reinstalling in the 7190.
• When the filter element is dry, remove the 7190’s front grille and
replace the filter in its recess, assuring that its entire perimeter is
behind the metal lip of the recess.
• Reinstall the grille with its two Phillips screws.