Filter
Top Products
C H A P T E R 5Intel® NetStructure™ 7190 Multi-Site Traffic Director User Guide
52
factory_reset
NOTE: factory
_reset
does not
delete saved
configuration files.
CAUTION: This
command rewrites
the default
configuration to the
default.cfg
configuration file.
This command resets system to factory defaults. Values affected by this
command are:
• Entire current DNS configuration is deleted
• Route parameters
• CLI parameters
• IP address
• Default route
• Hostname
• Domain
• Name servers
• DHCP is disabled
• Autoboot is set to “enabled”
halt
This command halts the 7190 system.
Command Description
Boot Monitor Command Reference