Intel 7190 Satellite TV System User Manual


 
C H A P T E R 6Intel® NetStructure 7190 Multi-Site Traffic Director User Guide
88
config sys
software delete
Delete old versions of the software from local storage. It can be
used to free local storage to install a version update or product
upgrade.
Syntax:
config sys software delete <index>
where:
index is a valid index number of an installed software image,
as displayed using the command,
config sys software info
(also: show sys software info)
secondary
NOTE: secondary
commands do not need to
be committed to become
active (they are in effect for
any future connection
attempts).
Changes the prompt level to the config sys secondary
branch.
secondary any
Allows any secondary 7190 to connect to the primary 7190. This
command is executed on the primary 7190.
secondary info
Displays information about which secondary 7190s can connect.
secondary flash
Allows only secondary 7190s with an IP address in the Flash peer
list to connect. This command is executed on the primary 7190.
secondary list
Displays only secondary 7190s configured using the config
sys secondary create <ip> command.
secondary create
<ip>
Adds addresses to the config sys secondary list. These are
addresses of 7190s that can be connected as secondaries.
secondary delete
<ip>
NOTE: Deleting an
address prevents future
connections for the
specified address.
Deletes addresses from the config sys secondary list.
Command Description
Config Sys Commands