Intel 7190 Satellite TV System User Manual


 
C H A P T E R 5Intel® NetStructure 7190 Multi-Site Traffic Director User Guide
48
System Requirements
You can use any terminal or personal computer with a terminal
emulator as the CLI command station.
The terminal must have the following features:
9600 bits per second, 8 data bits, 1 stop bit no parity, no flow
control.
Serial terminal emulation program such as Terminal or
HyperTerminal® for Windows® NT or HyperTerminal for
Windows 95 or 98.
Cable and connector to match male DTE connector (DB-9).
Accessing the Boot Monitor
NOTE: After configuring
the 7190 in the Boot
Monitor, you must enable
autoboot for the device to
boot into normal
operating mode.
To access the Boot Monitor Command Line Interface, interrupt the
boot sequence by pressing a key at the following prompt:
Press any key to stop autoboot
In a few seconds the following prompt appears, confirming that the
Boot Monitor is running:
monitor>
Boot Monitor Command
Reference
The Boot Monitor contains the following commands: