Filter
Top Products
C H A P T E R 6Intel® NetStructure™ 7190 Multi-Site Traffic Director User Guide
86
Config Sys Commands
Command Description
config sys
Changes the prompt level to the System Config branch.
info
NOTE: The default route
is the same as the default
gateway.
Displays the 7190’s current system information.
For example:
System Id:
MAC Address: 0:90:27:73:f0:e4
IP Address: 10.1.10.227
Netmask: 255.255.0.0
Broadcast: 10.1.255.255
Default Route: 10.1.1.1
Nameservers: mysite-ex.com
10.1.1.10
logs display
Displays the contents of the specified log file.
Syntax:
config sys logs display
<all|dns|ntp|system|monitor|stats>
where:
all - displays all log messages
dns - displays DNS activity and health monitor information on
this 7190.
ntp - displays ntp messages
system - displays system messages
monitor - displays monitoring messages
stats - displays statistical information
logs display-old
Displays the contents of the old log file.
Syntax:
config sys logs display-old
<system|dns|ntp|stats|all>
software
Changes the prompt level to config sys software.
Config Sys Commands