Filter
Top Products
Intel
®
NetStructure
TM
ZT 7102 Chassis Management Module
Busless Backplane Support
Technical Product Specification 125
24.0 Busless Backplane Support
The ZT 7102 supports busless PICMG* 2.16 backplanes. Busless backplanes are PICMG 2.16
backplanes that do not have the CompactPCI* bus routed or enabled. When the CMM is inserted
into a busless backplane, the ZT7102 does not perform a check for system or peripheral slots, and
powers up the boards in any slot regardless. Boards used in this type of chassis should be system
master, or drone mode enabled boards. Special care should be taken to not use peripheral only
boards in such a chassis as these boards rely on a system master and CompactPCI bus to operate
properly.