Filter
Top Products
Intel
®
NetStructure
TM
ZT 7102 Chassis Management Module
Command Line Interface (CLI) Syntax and Arguments
Technical Product Specification 61
8.6 Value Parameter: -v
The Value parameter specifies the new value for a Dataitem. This parameter is required for all
cmmset commands and is only used for cmmset commands. Valid value parameters are shown in
with their corresponding data items in the data item tables listed above.
8.7 Sample CLI Operations
Sample CLI Operations can be found in Appendix D, “Example CLI Commands”.
failover
Used only from the active CMM to failover to the standby
CMM. This command will only successfully execute if
the standby CMM is in a healthy enough state to accept
a failover.
Set 1 - Failover
redundancy
Used to query CMM redundancy information. Indicates
CMM(s) presence, which CMM is active, which CMM is
stand by, and which one the user is logged into.
Get N/A
version The version of the CMM software. Get N/A
snmptrapcommunity Set or query the SNMP trap community string. Both
Valid SNMP
community
name:
public (default)
snmpenable Sets or queries the SNMP trap enabled status. Both
Enable
(default)
Disable
snmptrapaddress[1..5]
The IP address of the machines receiving SNMP traps
from the CMM.
Both
IP Address in
the form:
x.x.x.x
snmptrapport
Sets or queries the TCP/IP port that the SNMP trap will
be sent from.
Both
Valid port
number:
0-65536
162 (default)
snmptrapversion Sets or queries the SNMP trap version. Both
V1(default)
V3
update
Used with the cmmget command to update the CMM
firmware on the CMM.
The syntax of the command is: cmmset -l cmm -d update
-v [Update Package path and filename] [force]
[overwrite] [ftp:server:user:password]
Refer toChapter 25.0, “Updating Software” for more info.
Set
Starts the
update of the
firmware on
that CMM.
Table 27. dataitem (-d) Keywords for CMM Location (Sheet 2 of 2)
Data Item Description
Get/
Set
Valid Set
Values: