Filter
Top Products
Intel
®
NetStructure
TM
ZT 7102 Chassis Management Module
Agency Approvals
Technical Product Specification 151
Warning: To Avoid Electric Overload: To avoid electrical hazards (heat shock and/or fire hazard), do not
make connections to terminals outside the range specified for that terminal. See the product user
manual for correct connections.
Warning: To Avoid the Risk of Electric Shock: When supplying power to the system, always make
connections to a grounded main. Always use a power cable with a grounded plug (third grounding
pin). Do not operate in wet, damp, or condensing conditions.
Caution: System environmental requirements: Components such as Processor Boards, Ethernet Switches,
etc., are designed to operate with external airflow. Components can be destroyed if they are
operated without external airflow. External airflow is normally provided by chassis fans when
components are installed in compatible chassis. Never restrict the airflow through the unit's fan or
vents. Filler panels or air management boards must be installed in unused chassis slots.
Environmental specifications for specific products may differ. Refer to product user manuals for
airflow requirements and other environmental specifications.
Warning: Device heatsinks may be hot during normal operation: To avoid burns, do not allow anything to
touch heatsinks.
Warning: Do Not Operate Without Covers: To avoid electric shock or fire hazard, do not operate this
product with any removed enclosure covers or panels.
Warning: To Avoid the Risk of Electric Shock: Do not operate in wet, damp, or condensing conditions. To
avoid electric shock or fire hazard, do not operate this product with enclosure covers or panels
removed.
Warning: Avoid injury, fire hazard, or explosion: Do not operate this product in an explosive atmosphere.
Warning: If Your System Has Multiple Power Supply Sources: disconnect all external power connections
before servicing.
Warning: Power supplies must be replaced by qualified service personnel only.
Caution: Lithium batteries are not field-replaceable units. There is a danger of explosion if a battery is
incorrectly replaced or handled. Do not disassemble or recharge the battery. Do not dispose of the
battery in fire. When the battery is replaced, the same type or an equivalent type recommended by
the manufacturer must be used. Used batteries must be disposed of according to the manufacturer's
instructions. Return the unit to Intel for battery service.
Warning: Avoid injury: This product may contain one or more laser devices that are visually accessible
depending on the plug-in modules installed. Products equipped with a laser device must comply
with International Electrotechnical Commission (IEC) 60825.