LG Electronics 120S Universal Remote User Manual

Open as PDF

of 306

Appendix 2 Flag List

App2-2

(Continued)

Relay Function Description

F0040 to F005F I/O error

When the reserved I/O module (set by the parameter) differs

from the real loaded I/O module or a I/O module has been

mounted or dismounted, the corresponding bit turns on.

F0060 to F006F Storing error code Stores the system error code, (See Section 2.9)

F0070 to F008F Unused

F0090 20-ms cycle clock

F0091 100-ms cycle clock

F0092 200-ms cycle clock

F0093 1-sec cycle clock

F0094 2-sec cycle clock

F0095 10-sec cycle clock

F0096 20-sec cycle clock

F0097 60-sec cycle clock

Turning On/Off is repeated with a constant cycle.

F0098 to F009F Unused

F0100 User clock 0

F0101 User clock 1

F0102 User clock 2

F0103 User clock 3

F0104 User clock 4

F0105 User clock 5

F0106 User clock 6

F0107 User clock 7

Turning On/Off is repeated as many times as the scan specified

by Duty instruction.

F0108 to F010F Unused

F0110 Operation error flag Turns on when an operation error has occurred.

F0111 Zero flag Turns on when the operation result is “0”.

F0112 Carry flag Turns on when a carry occurs due to the operation.

F0113 All outputs off Turns on when an output instruction is executed.

F0115 Operation error flag (Latch) Turns on when an operation error has occurred.(Latch)

F0116 Overflow error flag Turns on when overflow has occurred.

F0117 to F011F Unused

F0120 LT flag Turns on if S

< S