Filter
Top Products
120
Appendix 5 When Using GX Developer and GX
Configurator-CT
This chapter describes how to operate GX Developer and GX Configurator-CT.
(1) Applicable software versions
For the applicable software versions, refer to the following.
MELSEC-L CPU Module User's Manual (Hardware Design, Maintenance and Inspection)
Appendix 5.1 GX Developer operation
When using GX Developer, configure settings in the following screens.
(1) I/O assignment
Open the "I/O assignment" tab.
Parameter [PLC parameter] [I/O assignment]
Screen Application Reference
I/O assignment Set the type and the I/O signal range of the module to be connected. Page 120, Appendix 5.1 (1)
Intelligent function module
detailed setting
Set an output mode if a CPU stop error occurs and CPU module operation
mode if a high-speed counter module error is detected.
Page 121, Appendix 5.1 (2)
Switch setting for I/O and
intelligent function module
Set a pulse input mode, counting speed, and counter type. Page 122, Appendix 5.1 (3)
Item Description
Type Select "Intelli.".
Model name Enter the model name of the module.
Points Select "16point".
Start XY Enter the start I/O number of the high-speed counter module if required.