Filter
Top Products
88
CHAPTER 10 PROGRAMMING
This chapter describes basic programs of the high-speed counter module.
10.1 Using the Module in Standard System Configuration
This section describes the system configuration and program examples based on conditions.
(1) System configuration
The following figure shows an example using the high-speed counter module in standard system configuration.
When using the L02CPU, assign X/Y30 to X/Y3F for the high-speed counter module to set the same assignment as the
system above. For the LX40C6, assign X/Y40 to X/Y4F and for the LY41NT1P, assign X/Y50 to X/Y6F.
(2) Programming condition
The program counts pulses input to CH1 of the high-speed counter module.
Power supply module (L61P)
Input module (LX40C6)
Output module (LY41NT1P)
High-speed counter module (LD62)
END cover (L6EC)
CPU module (L26CPU-BT)
X/Y00
to
X/Y0F
X/Y30
to
X/Y3F
X/Y40
to
X/Y4F
X/Y50
to
X/Y6F
X/Y10
to
X/Y2F