Filter
Top Products
3 - 51 3 - 51
MELSEC-Q
3 SPECIFICATIONS
POINT
When the Block send/receive data assurance per station setting is enabled, the
following formulas are used.
1) Formula for Transmission delay time (T
DM1)
[Multiplexed remote master station side scan time (Sm) > Link scan time (LS)]
T
DM1 = (Sm + m) + LS + (Ss 2 + s ) [ms]
[Multiplexed remote master station side scan time (Sm) < Link scan time (LS)]
T
DM1 = (Sm + m) round up[LS/(Sm + m)] 2 + LS + (Ss 2 + s )
[ms]
2) Formula for Transmission delay time (T
DS1)
The same formula is used independently of the Block send/receive data
assurance per station setting.