Filter
Top Products
5 - 32 5 - 32
MELSEC-Q
5 PARAMETER SETTINGS
5.1.7 Redundant settings
For the multiplexed remote master station for redundant system, it is necessary to set
the same mode as the mode applied to the multiplexed remote master station (system
A) to the multiplexed remote sub-master station (system B).
Set the mode of system B in the redundant settings.
Set the mode of the
multiplexed remote master
station.
Click the button.
Set the mode of system B on the redundant setting screen.
Set the same mode as the mode
applied to the multiplexed
remote master station
(system A).