Filter
Top Products
4 - 27 4 - 27
MELSEC-Q
4 SETTING AND PROCEDURE BEFORE OPERATION
(b) Installing the coaxial cable
The following are how to install the coaxial cable:
Insert the plug by aligning the groove of
the plug with the projection of the jack.
Complete
Installation
Rotate the plug in the direction of the
arrow (clockwise) securely to the position
shown in the second figure from above.
Turn OFF the power.
Plug
Jack
Groove
Projection
Network module
(c) Removing the coaxial cable
The following are how to remove the coaxial cable:
Rotate the plug in the direction of the
arrow and unhook it.
Removal
Complete
Hold the plug by hand and pull it out in
the direction of the arrow as shown in
the bottom diagram.
Turn OFF the power.
Network module
Plug