Mitsubishi Electronics QJ72LP25-25 Universal Remote User Manual


 
5 - 4 5 - 4
MELSEC-Q
5 PARAMETER SETTINGS
Table 5.2 Remote I/O station PLC parameter setting items
Network station type
Parameter setting item
Remote I/O station
Reference
section
PLC system
Section 5.2.1 Points occupied by empty slot
Module synchronization
PLC RAS
Section 5.2.1 Operating mode when there is an error
Error check
Operational settings
Section 5.2.1
Remote I/O switch setting
Assignment method
Forwarding parameter between devices
I/O assignment
Section 5.2.1 I/O Assignment
Standard setting
: Always set : Default setting exists : Set as needed : Setting not required
Table 5.3 Remote I/O station network parameter setting items
Network station type
Parameter setting item
Remote I/O station
Reference
section
Ethernet
Section 5.2.1
CC-Link
Section 5.2.1
: Always set : Default setting exists : Set as needed : Setting not required
Table 5.4 Remote I/O station remote password setting items
Network station type
Parameter setting item
Remote I/O station
Reference
section
Password setting
Section 5.2.1
Password active module settings
Section 5.2.1
: Always set : Default setting exists : Set as needed : Setting not required
Refer to the intelligent function module user's manual for details about intelligent
function module parameters.