Filter
Top Products
105
Customizing the Function Settings
■
Adjusting the picture quality
Depending on discs and the TV/monitor, you may not see the result of these adjustments clearly.
Creating your own quality setting
Memory
Fine Focus
Contrast
Sharpness
Chroma Level
Hue
min max
min max
soft fine
green red
Off
On Off
123
Prog. Memory
DNR
Sharpness
Detail
Chroma Delay
Gamma
min max
min max
off max
soft fine
green red
Off 1 2 3
Press to select [Video2] ➔
[Video Adjust] ➔ [Start], then press
ENTER.
The quality adjustment window appears.
Press to select [Interlace Video
Memory Select], then press ENTER.
Press to select the desired item to
adjust, then press DISPLAY to display
the parameter list of the selected item.
Press DISPLAY again to display the pre-
vious window.
/ //
/
DISPLAY
ENTER
Fine Focus
Move
Select
Off Off
Check
/
1
2
3
Fine Focus
Switch [On] to reveal greater detail (higher resolu-
tion) in the picture.
Contrast
Adjusts the contrast of the elements in the picture.
Sharpness
Adjusts the sharpness of the mid-frequency (less
detailed) elements in the picture. (This setting is
only effective when [Fine Focus] is [On].)
Chroma Level
Adjusts the color saturation level.
Hue
Adjusts the overall color balance between red and
green. (This is effective only when the PDR-155 is
connected via the VIDEO OUT or S VIDEO OUT
jacks.)
DNR
Adjusts the amount of signal noise in the lumi-
nance component of the video signal.
Sharpness
Adjusts the sharpness of the mid-frequency (less
detailed) elements in the picture.
Detail
Reveals greater detail (higher resolution) in the pic-
ture.
Chroma Delay
Adjusts luminance (Y) and color (C).
Gamma
Adjusts the brightness of the darker images in the
picture.
• If you have selected [Interlace] for [Component
Video], [Interlace Video Memory Select] is avail-
able. If you have selected [Progressive] for [Compo-
nent Video], [Progressive Video Memory Select] is
available.
[Interlace] mode [Progressive] or [Auto Progressive] mode
L-DR7_E.book Page 105 Tuesday, December 24, 2002 3:10 PM