Filter
Top Products
34
Connections
■
Connecting a CD recorder or VCR (CDR/VIDEO IN/OUT jacks)
You can connect the audio input and output of a CD recorder or VCR to these jacks. Connect the
video output from the VCR to the TV.
To connect the L-DR7 to an Onkyo product that has an jack, select an appropriate input
source using the [INPUT] button (page 42).
Connecting an Onkyo Separate Collection Series CD recorder
Connect the PDR-155’s CDR/VIDEO AUDIO IN jacks to the CDR-201A’s ANALOG OUTPUT
jacks.
Connect the PDR-155’s CDR/VIDEO AUDIO OUT jacks to the CDR-201A’s ANALOG INPUT
jacks.
Note that the available components may vary depending on the area.
Connecting other CD recorder or VCR models
Connect the PDR-155’s CDR/VIDEO AUDIO IN jacks to the analog audio output jacks of the CD
recorder or VCR.
Connect the PDR-155’s CDR/VIDEO AUDIO OUT jacks to the analog audio input jacks of the CD
recorder or VCR.
• Be sure to insert the cable plugs completely into the jacks. If the
connection is incomplete, noise or malfunction may occur.
• Do not bundle the audio pin cables with the power cable and/or
speaker cords. Otherwise, tonal quality may deteriorate.
• When you use an optical audio digital cable, do not bend or coil it
tightly.
• After all connections are completed, insert the power cable plug
into an appropriate AC outlet (page 40).
• The DIGITAL jack has a protective cap installed. When you use this jack,
remove the cap. When you are not using this jack, be sure to replace the
cap.
Digital recording from the PDR-155 to a CD recorder
Use an optical digital cable to connect the PDR-155’s DIGITAL OUT jack to a digital audio input
jack on the CD recorder. If you are using the CDR-201A, use its DIGITAL INPUT 1 jack.
Incomplete
Insert completely
L-DR7_E.book Page 34 Tuesday, December 24, 2002 3:10 PM