Filter
Top Products
17
Supplied Accessories
■
Using the included cork spacers and installation brackets
• Cork spacer for the subwoofer (SWA-155X)
•
Cork spacers for the speakers (D-M7, D-M3)
(The illustrations below indicate the D-M7 speaker.)
Caution:
Before you mount the speakers on a wall, check the strength of the wall. The supporting strength
of the screws varies depending on the wall material and the position of the studs. Use screws as
thick and long as possible, with a head diameter of 10 mm or less and a thread diameter of 4 mm
or less. (We recommend that you consult a professional home electronics installer.)
We recommend that you use the
included cork spacers so you can
enjoy superior sound.
The cork spacers also prevent the
subwoofer from slipping.
Cork spacer
Bottom of SWA-155X
We recommend that you use the included cork spacers so you can enjoy superior sound.
The cork spacers also prevent the speakers from slipping.
Positioning vertically Positioning horizontally
Cork spacer
Bottom of D-M7
Side of D-M7
Mounting on a wall
Installation
screw
Bottom of D-M7
Installation bracket
Top of D-M7
Wall-mount the speakers upside
down. Layer two spacers and attach
them to two locations. The plaques
rotate so that you can position the
speakers upside down.
Attaching the brackets:
Use the included screws to attach the
brackets to the back of the speakers.
L-DR7_E.book Page 17 Tuesday, December 24, 2002 3:10 PM