Filter
Top Products
143
Integrator Mode
5.4.2 Example of Integrator Mode Operation
The basic operation in the menu mode is explained using
brightness adjustment as an example.
4 Press the [MENU] button on the remote control
unit or the main-control panel when ‘DISPLAY
CALL 2’ is displayed to open up the integrator
mode screen.
INTEGRATOR INPUT1
ENTER
SCREEN SETUP OPTION
CONTRAST
BRIGHTNESS
H. ENHANCE
V. ENHANCE
GAMMA
P I CTURE RESET
WH I TE BALANCE
COLOR DETA I L
PICTURE
: 128
: 0
: 0
: 128
: 2.0
SET EXITMENU
5 Press the [5/∞] buttons on the remote control
unit or the main-control panel to select
‘BRIGHTNESS’ then press the [SET] button.
INTEGRATOR INPUT1
ENTER
SCREEN SETUP OPTIONPICTURE
SET EXITMENU
: 2.0
: 128
: 0
: 0
: 128CONTRAST
BRIGHTNESS
H. ENHANCE
V. ENHANCE
GAMMA
P I CTURE RESET
WH I TE BALANCE
COLOR DETA I L
6 Press the [2/3] buttons on the remote control
unit or the main-control panel to adjust to the
desired picture.
BRIGHTNESS
:
SET
SET EXIT
MENU
0
It is possible to move to other adjustment items
with the 5/∞ buttons.
7 Press the [SET] button on the remote control
unit or the main-control panel.
The adjusted value is saved in memory then
operation returns to the screen in step 5.
To continue with adjusting another item, repeat
steps 5 to 6.
8 When adjustment is complete, press the [MENU]
button on the remote control unit or the main-
control panel button to return to the normal
screen.
STANDBY/ON MENU
DISPLAY
/ SET
– VOL +INPUT SCREEN SIZE
2/3MENU DISPLAY
/ SET
5/∞
MENU
5/∞
SET
2/3
DISPLAY
Main-control panel
Remote control unit
1 Set the device to normal operation then press
the [INPUT] button to switch to the input to be
adjusted.
2 Press the [DISPLAY] button on the remote
control unit or the main-control panel to display
‘DISPLAY CALL 1’.
FULL
640
X
480
INPUT1
FH : 31.5kHz
FV : 60.0Hz
POL.H : NEGA
POL.V : POSI
3 Press the [DISPLAY] button on the remote
control unit or the main-control panel (three
seconds or more) when ‘DISPLAY CALL 1’ is
displayed to display ‘DISPLAY CALL 2’.
TEMPERATURE
HOUR METER
OSD
BAUD RATE
INFORMATION
:ABCDEFGHIJKLMN
FAN CONTROL
ID NO. SET
COLOR MODE
:+25
:AUTO
:9600BPS
:ON
:ALL
:NORMAL
:00239H
DATE
:001A001X
LOT
:001A001K
SERIAL NO.
:****************
PDP-607CMX