Filter
Top Products
60
Video Card: PDA-5003/PDA-5004
4.3.11 Audio connections
Before making connections, be sure to check that the
audio component’s power and the display’s main power
is off.
Connect an audio component to the audio
input jack of the Plasma Display with installed
video card.
When the video card is installed, the Plasma Display
provides four or five audio input jacks and one audio
output jack. Consult the following chart to choose the
proper audio input for each video input.
*1
When using the PDA-5003, the INPUT3 and INPUT4
audio input connectors are shared.
Audio connection for component connected to
INPUT1
AUDIO AUDIO
INPUT1
AUDIO
OUTPUT INPUT2
A stereo miniplug cable can be used to connect the
audio output from the component connected to
INPUT1, to the Plasma Display’s AUDIO (INPUT1) jack
(L/R).
Sound is output from both the AUDIO (OUTPUT) stereo
mini jack (L/R) and the SPEAKER (L/R) terminals
according to the video input selection.
Audio connections for component connected to
INPUT2
AUDIO AUDIO
INPUT1
AUDIO
OUTPUT INPUT2
A stereo miniplug cable can be used to connect the
audio output from the component connected to
INPUT2, to the Plasma Display’s AUDIO (INPUT2) jack
(L/R).
Sound is output from both the AUDIO (OUTPUT) stereo
mini jack (L/R) and the SPEAKER (L/R) terminals
according to the video input selection.
Audio connection for component connected to
INPUT5
RL
INPUT5
AUDIO
The audio line for the component connected to INPUT5
can be connected to the AUDIO R/L (INPUT5) pin jacks.
Sound is output from both the AUDIO (OUTPUT) stereo
mini jack (L/R) and the SPEAKER (L/R) terminals
according to the video input selection.
INPUT1
INPUT2
INPUT5
INPUT3
INPUT4
Audio input Sound output
Stereo mini jack (L/R)
Stereo mini jack (L/R)
Pin jacks (L/R)
Pin jacks (L/R)
*1
Pin jacks (L/R)
*1
Sound of the selected
video input is output from
the
• SPEAKER (L/R) terminals
• Stereo mini jack (L/R).
Video
input