Filter
Top Products
3
Table of Contents
CAUTION
• To prevent injury and material damage, thoroughly read
this manual and all labels found on the equipment before
attempting to mount, install, move, or adjust the product.
• Do not install the unit outside or in the open air. Doing
so will lead to water seepage into the system, resulting
in fire or electric shock.
• Be especially careful when working around parts of the
system that have sharp edges.
• When performing installation work from a height, take
suitable precautions to guard against falling. Set up a
barrier around the work site to prevent accidentally
dropped objects that can injure people standing or
walking below. Tampering with the unit may result in
fire or electrical shock.
• Keep all foreign objects out of the unit. Tampering with
the unit may result in fire or electrical shock.
• Observe the following operating environmental
limitations:
Temperature: 0 °C to 40 °C
Humidity: 20 % to 80 %
• Install the unit only in properly ventilated areas.
5.4 Integrator Mode ....................................................... 142
5.4.1 About the Integrator Mode ............................. 142
5.4.2 Example of Integrator Mode Operation .......... 143
5.4.3 Adjustment and Setting in the Integrator
Mode ............................................................... 144
1) PICTURE Adjustment ............................... 144
2) WHITE BALANCE Adjustment ................. 145
3) COLOR DETAIL setting ............................ 146
4) GAMMA Setting ....................................... 147
5) SCREEN (Screen Position) Adjustment .... 148
6) Brightness Enhancement (BRT. ENHANCE)
Setting at the Center of the Screen .......... 149
7) SUB VOLUME Setting .............................. 150
8) Program Timer Setting ............................. 151
9) SCREEN MASK Setting ............................ 153
10) SIDE MASK Setting .................................. 154
11) VIDEO WALL Setting ............................... 156
12) BAUD RATE Setting ................................. 160
13) Assigning an ID ......................................... 161
14) Cooling Fan Control Setting ...................... 163
15) OSD Display Setting ................................. 164
16) FRONT INDICATOR Setting ..................... 166
17) COLOR MODE Setting ............................. 167
18) PRO USE Setting ...................................... 168
19) FRC Setting .............................................. 170
20) POWER ON MODE Setting ...................... 172
21) SEAMLESS SW Setting ............................ 174
22) MIRROR MODE Setting ........................... 175
23) MULTISCREEN Setting ............................ 177
24) REPEAT TIMER Setting ............................ 180
25) FUNCTIONAL LOCK ................................. 182
26) Center Position Display ............................ 183
5.4.4 PICTURE, White Balance and SCREEN Position
Adjustment Values Memory Area Tables ....... 184
5.5 RS-232C Adjustment ................................................ 189
5.5.1 About the RS-232C Adjustment ...................... 189
5.5.2 Interface .......................................................... 190
5.5.3 Combination Connection ................................. 191
5.5.4 ID Assignment ................................................ 192
5.5.5 List of RS-232C Commands ............................ 194
5.5.6 QUEST Commands ......................................... 202
5.6 Screen Burning ........................................................ 210
5.7 Precautions on Connecting Camera Images ......... 212
5.8 Concerning frame delay (lip sync) .......................... 212
PRECAUTION
6.1 Precautions ............................................................... 213
MAINTENANCE .................................................................. 214