Pioneer PDP-501MX Flat Panel Television User Manual


 
100
INPUT 2 [Component, Horiz. 15.6 kHz x Vert. 50 Hz] (Note 1)
[Component, Horiz. 31.3 kHz x Vert. 50 Hz] (Note 1)
[Component, Horiz. 15.7 kHz x Vert. 60 Hz]
[Component, Horiz. 31.5 kHz x Vert. 60 Hz]
VIDEO Sig., Component
[Component, Horiz. 15.6 kHz x Vert. 50 Hz] (Note 1)
[Component, Horiz. 31.3 kHz x Vert. 50 Hz] (Note 1)
[Component, Horiz. 15.7 kHz x Vert. 60 Hz]
[Component, Horiz. 31.5 kHz x Vert. 60 Hz]
[Component, Horiz. 33.8 kHz x Vert. 60 Hz] (Note 2)
[Component, Horiz. 45.0 kHz x Vert. 60 Hz] (Note 2)
PC (Personal Computer) Sig.
[640 x 400, PC-9800 (56.4 Hz)]
[640 x 400, PC-9800, PC/AT compatibles (70.1 Hz)]
[640 x 480, PC-9800, PC/AT compatibles (59.9 Hz)]
[640 x 480, PC-9800, PC/AT compatibles (75 Hz)]
[800 x 600, PC-9800, PC/AT compatibles (60.3 Hz)]
[800 x 600, PC-9800, PC/AT compatibles (75 Hz)]
[1024 x 768, PC-9800, PC/AT compatibles (70.1 Hz)]
[1024 x 768, PC-9800, PC/AT compatibles (75 Hz), Macintosh (74.9 Hz)]
[1028 x 1024, PC-9800, PC/AT compatibles (60 Hz)]
[640 x 480, PC/AT compatibles (72.8 Hz)]
[800 x 600, PC/AT compatibles (56.3 Hz)]
[800 x 600, PC/AT compatibles (72.2 Hz)]
[1024 x 768, PC/AT compatibles (60 Hz)]
[1024 x 768, PC/AT compatibles (87 Hz) (Interlace)]
[640 x 480, Macintosh (66.7 Hz)]
[832 x 624, Macintosh (74.6 Hz)]
[1152 x 870, Macintosh (75.1 Hz)]
INPUT 3
Screen Adjustment Data for
Use in Menu Mode
Reproduce
Screen
Data
Screen Adjustment Data for
Use in Integrator Mode
(Note 3)
• CLK FRQ
• H.POSI.
• V.POSI.
• CLK FRQ
• CLK FRQ
• H.POSI.
• V.POSI.
VIDEO Sig., RGB
[RGB, Horiz. 15.6 kHz x Vert. 50 Hz] (Note 1)
[RGB, Horiz. 31.3 kHz x Vert. 50 Hz] (Note 1)
[RGB, Horiz. 15.7 kHz x Vert. 60 Hz]
[RGB, Horiz. 31.5 kHz x Vert. 60 Hz]
[RGB, Horiz. 33.8 kHz x Vert. 60 Hz] (Note 2)
[RGB, Horiz. 45.0 kHz x Vert. 60 Hz] (Note 2)
• H.POSI.
• V.POSI.
• CLK PHS
• CLK FRQ
• H.POSI.
• V.POSI.
• CLK PHS
• CLK FRQ
• Data at
<ZOOM> time
• H.POSI.
• V.POSI.
CONTINUED ON THE NEXT PAGE
Integrator Mode
5.4.6 SCREEN parameter memory area table
The memory area for SCREEN parameters has the following structure, and has no FACTORY area.
The SCREEN parameters are set to median values when performing INITIALIZE, for example.
The SCREEN parameters cannot be adjusted when selecting INPUT 1.
Note 1: EURO models only.
Note 2: U.S. models and TAIWAN models only.
Note 3: CLK PHS is effective both on the Menu and the Integrator mode at one time.
PC-9800
®
is a registered trademark of NEC Corporation.
Macintosh
®
is a registered trademark of Apple Computer Inc.