Filter
Top Products
37
Handling the Standard Mounting Equipment
4.2 Handling the Standard Mounting Equipment
4.2.1 Handling precautions
This section of the manual discusses ways to mount, install, and handle the mounting equipment exclusively designed
for our plasma displays. Mounting should be performed by qualified experts. Refer all installation and mounting work to
qualified persons, or request assistance from a Pioneer dealer.
4.2.2 Precautions for installation contractors
1) Before starting installation
Read the specifications provided in 3.1 Installation Conditions.
2) During installation
Carefully read the discussion provided in this section of the manual. The installation work should be performed by
more than two people.
3) After installation
After installing the mounting equipment, check for adequate strength and properly tightened screws. Repeat this
inspection after mounting the display.
4) Delivering to the customer
(1)Explaining operating precautions
We ask the mounting contractor to explain the following precautions to the customer after mounting and installation
work is complete. Even if the particulars of an installation happen to be letter-perfect, your work may be perceived
as inadequate unless you are patient and thorough in providing these precautions.
¶ The following are highly dangerous and must be avoided at all times:
• Any sudden application of force, including pushing or pulling
• Splashing water on the unit
• Placing any object on the unit
• Touching mount screws and other mounting components
¶ For worry-free use of the unit:
• If any problem arises, the user should immediately ask the installation contractor to conduct inspections and
repairs.
• To guard against accidents, ask the user not to make any tilt or height adjustments. Such work should be
referred to the installation contractor.
(2)Mounting contractor contact form
We ask the mounting and installation contractor to complete the contractor contact form supplied with the unit
and to give it to the end-user after post-installation inspections are complete and the above precautions have been
explained.
(3)Periodic inspection
Over time, various internal parts or components of the suspension/mounting hardware may render the installation
unreliable, possibly leading to the display breaking free of its mounting. Please recommend periodic inspections.