Filter
Top Products
58
Speaker System: PDP-S02-LR
4.6.4 Mounting with PDK-5006 (wall-mounting hardware)
Hexagonal socket
head button bolt
(supplied with
optional speaker)
Washer 15 mm in o.d.
(supplied with optional speaker)
Monitor mount bolt
Hole rivet
Figure 4
When mounting the plasma display with the optional speakers to the ceiling-suspension hardware, first fasten the
speakers to the display with monitor mount bolts and the hexagonal socket head button bolts and washers (outer
diameter:15 mm) that are supplied with the optional speaker, as shown in Figure 4. Next, referring to Figure 5, use the
upper left and right monitor mount bolts, which are not used to mount the speaker system, to attach the wall mount
hardware to the display using the washers (outer diameter:25 mm) supplied with the optional speakers.
Then follow normal mounting procedures to secure the mounting hardware to the display.
Mounting the optional speakers to the display makes it difficult to access the monitor mount bolts. Take care while
performing mounting work.