Filter
Top Products
25
4) Arranging and securing cables with speed clamps and bead bands
• Cables may also be drawn around to the right, viewed from
this side.
1 Secure cables with speed
clamps.
1
2
Insert part 1 into an opening in
the rear cover, then insert part 2,
as shown.
2 Bundle cables using
bead bands.
Cords
Fastening points for speed clamps
Bundled cables can be
drawn to the left or right.
Depending on specific
requirements, you may use
the four openings indicated
by solid circles (¶).
How to unlock the speed clamp
Use a pair of pliers to twist
the clamp by at least a
quarter-turn and pull
outward. Remember that this
procedure entails risk of
damaging the clamp.
* Display viewed from the rear.
Fasten cables using the supplied speed clamps.
Remember that speed clamps are not
easily removed, once fastened.
1
Secure cables with the supplied bead bands.
2
Installation Procedures