Filter
Top Products
89
Integrator Mode
Screen 1
]
MENU – –
3WHITE BALANCE
SCREEN
ADDITIONAL SET UP
TOTAL INITIALIZE
PICTURE
Screen 2
]
WHITE BALANCE – –
G HIGH 128
B HIGH 128
R LOW 128
G LOW 128
B LOW 128
3R HIGH 128
INITIALIZE
EXIT
Screen 3
]
WHITE BALANCE – –
R HIGH 128
1 Before entering the Integrator mode, switch the unit to the
specific input (INPUTs 1-4) in which you intend to make
adjustments. (Refer to “5.4 .1About Integrator Mode.”)
The ID number of the set of items will be indicated in the
upper right corner of the screen, where “– –”is displayed in
the illustration.
Select WHITE BALANCE.
2 Select the desired adjustment item.
Selecting INITIALIZE on screen 2 resets all WHITE
BALANCE parameters to their default values. (Refer to
“5.4.3,” paragraph 9).)
Select EXIT in screen 2 to return to screen 1.
3 Make the necessary adjustments.
Adjustments can be made using the “2“ and “3” buttons
on the remote or the “–” and “+” buttons on the operating
panel of the main unit.
Press the SET button to return to screen 2.
<Adjustable Range> 0 to 255 for every item
2) Adjusting the WHITE BALANCE Parameters
WHITE BALANCE parameters include R HIGH, G HIGH, B HIGH, R LOW, G LOW, and B LOW.